How to Effectively Prevent Casement Window Part Corrosion
Posted in Window Parts, on June 06, 2022
Smaller and often thinner than a traditional double-hung window, casement windows are popular among homeowners for their ease of operation. Many Amesbury Truth hardware casement window parts are also designed with a storm window that helps to insulate and protect the main window. The casement seal is made up of a number of different parts used in casement window that all work together to keep water and air out of your home.
When we think about preventing casement window parts from corroding, we immediately think about cleaning them. While this is a great and effective way to prevent corrosion, it's actually not the most cost-effective option.
Preventing casement window hardware corrosion is difficult and time-consuming. In fact, it's hard to deter it if you are using regular soap and water for cleaning. To stop the corrosion of your window parts, you need to know what causes corrosion and what you can do about it.
The Causes of Casement Window Part Corrosion
- Water
- Salty Air
- Grime
- User Neglect
There are many causes of casement window corrosion, but the most common is exposure to weather and moisture. Moisture can cause corrosion by seeping into the metal and causing it to oxidize. This type of corrosion is often seen on outdoor metal surfaces that are exposed to the elements. Weather can also cause corrosion by creating conditions that are conducive to rust formation, such as high humidity or salt air.
- Salt can be introduced into your system in a few different ways.
- Soap residue left behind on the glass and metal can be left behind by soap residue leaching into the water.
- The most common way is through hard water that contains minerals that leave deposits on the metal parts. Just like soap residue, these deposits can cause corrosion to occur.
- Salt air can be another source of corrosion, especially if you live near the ocean or other large bodies of saltwater.
- Grime and dirt can also be major contributors, as dirt can hold moisture against your window parts.
Preventing Casement Window Hardware Corrosion
Besides shopping replacement window hardware from an Amesbury Truth distributor, the best way to prevent casement window part corrosion is to keep the metal clean and dry. This can be done by wiping down the metal with a clean, dry cloth after every use. If the metal becomes wet, it should be dried immediately. In addition, any products that come into contact with the metal should be free of moisture and chemicals that could cause corrosion. Ultimately, the selection of window hardware for all window types at Window Hardware Company are equipped with corrossion-resistant coatings to improve the longevity and performance of your window hardware.
How Do You Remove Rust From a Window?
There are several ways to remove rust from a window. The most common is using a wire brush or sandpaper to scrub the rust off the surface. This can be time-consuming and may not be completely effective. Another option is to use a chemical rust remover. These products can be found at most hardware stores and will usually require protection, such as gloves when using them.
If you require Amesbury Truth hardware or casement window parts, check out the Window Hardware Company!
Contact us today to find your matching casement window hardware.